Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.11 Transmission Assembly Overview
l - Assembly overview - trans‐
mission housing and shift
mechanism, refer to
⇒ “2.12 Transmission Housing
and Shift Mechanism Assem‐
bly Overview”, page 77
ll - Assembly overview - input
shaft, output shafts, differen‐
tial, bevel box and selector
rods, refer to
⇒ “2.13 Input Shaft, Output
Shafts, Differential, Bevel Box
and Selector Rods Assembly
Overview”, page 79
Input Shaft Cap with Circlip -A-
From transmission build date 1/21/08, the input shaft cap is se‐
cured with a circlip -A-.
⇒ “5.2 Transmission without Circlip A for Cap/Input Shaft”,
page 131
⇒ “5.3 Transmission with Circlip A for the Cap/Input Shaft”, page
142
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
76 Rep. Gr.34 - Controls, Housing
To Next Page
Loading...
