Audi TT 2007 - Specifications; Bevel Box Oil Filler Bolt; Manual Transmission Oil Filler Plug; Fastener Tightening Specifications

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3 Specifications
⇒ “3.1 Bevel Box Oil Filler Bolt”, page 87
⇒ “3.2 Manual Transmission Oil Filler Plug”, page 87
⇒ “3.3 Fastener Tightening Specifications”, page 87
3.1 Bevel Box Oil Filler Bolt
Oil Filler Bolt - Tightening Specification
Note
Replace the oil filler bolt -arrow-.
– Tighten the oil filler bolt to 15 Nm.
3.2 Manual Transmission Oil Filler Plug
Plug for oil filler and drain hole - tightening specifications
I - Bolt for oil filler and drain hole with multi-point socket head
♦ 45 Nm
II - Bolt for oil filler and drain hole with hex socket
♦ 30 Nm
3.3 Fastener Tightening Specifications
Component Bolt Size Nm
Bevel Box
1
40
Backup Light Switch 20
Clutch Housing
1
15 + 90°
Control Cable Mounting Bracket to Model Year 2007 20
Control Cable Mounting Bracket from Model Year 2008 20
Cover for Damper 6
Flange Shaft with Spring 33
Oil Filler Plug
1
15
Pendulum Support
2
Transmission with threaded inserts in connection with screws of
strength category 10.9:
50 + 90°
Transmission without threaded inserts and bolts with strength cate‐
gory 8.8
40 + 90°
1
100 + 90°
1
Selector Bracket
5
5
Selector Mechanism
1
20
Selector Shaft 45
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
3. Specifications 87