Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3 Specifications
⇒ “3.1 Fastener Tightening Specifications”, page 28
3.1 Fastener Tightening Specifications
Component Bolt Size Nm
Bracket for Clutch Pedal, Nut
1,2
20
25
Clutch Slave Cylinder, Bolt
Metal
12
Plastic
15
Crash Brace to Mounting Bracket/Steer‐
ing Column
10
Pressure Plate
M6 13
M7 20
Vent Screw
4.5
•
1
Always replace
•
2
For bolt tightening clarification, refer to
⇒ “2.2 Pedal Assembly, Master Cylinder Assembly Overview
”, page 17 and see items -15 and 16-
Impact Bolster - Tightening Specification
– Insert impact bolster -2- and tighten 1 or 2 bolts -B arrows-
depending on the version.
• M6: 10 Nm
• M8: 20 Nm
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
28 Rep. Gr.30 - Clutch
To Next Page
Loading...
