Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove bolts -arrows-.
– Open wiring guide bracket -arrows-.
– Cut cable ties -1- and press electrical wires to side.
– Unclip wiring guide.
– Remove bolts -1- and remove transmission mount -A-.
– Remove -10 - 222 A- from engine.
Install the transmission mount. Refer to
⇒ “4.9 Transmission Mount, installing”, page 116 .
4.9 Transmission Mount, installing
Installing
• Tightening specifications, refer to
⇒ “2.9 Subframe Mount Assembly Overview”, page 72 .
Install in reverse order, paying attention to the following:
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
116 Rep. Gr.34 - Controls, Housing
To Next Page
Loading...
