Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Component Bolt Size Nm
Selector Shaft
4
20
Shielding Plate/Right Drive Axle to Bevel Box
20
Shift Housing, Vehicles to VIN 8J-7-013000, Nut
8
Shift Housing, Vehicles from VIN 8J-7-013001, Nut
M6 8
M8 25
Small Flywheel Cover Plate
10
Transmission Bracket
1
60 + 90°
Transmission Mount
1,3
40 Nm + 90°
60 Nm + 90°
Transmission Shift Lever
1
23
•
1
Always replace
•
2
For bolt tightening clarification, refer to
⇒ “2.9 Subframe Mount Assembly Overview”, page 72 and see
items -2 and 13-
•
3
For bolt tightening clarification, refer to
⇒ “2.9 Subframe Mount Assembly Overview”, page 72 and see
items -14 and 15-
•
4
For bolt tightening clarification, refer to
⇒ “2.16 Shift Mechanism Assembly Overview, Transmission Side”, page 85 and see items -6-
•
5
For bolt tightening clarification, refer to
⇒ “2.12 Transmission Housing and Shift Mechanism Assembly Overview”, page 77 and see items -10-
Different Versions of Oil Filler- and Oil Drain Plugs
Component Nm
I - Oil filler- and oil drain plug with multi-point sock‐
et head
45
II - Oil filler- and oil drain plug with hex-socket
head
30
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
88 Rep. Gr.34 - Controls, Housing