Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Removing and Installing Lock Washer
– Hold shift lever -2- in position.
– Press spacer bushing -3- in direction of -arrow-.
– Remove the circlip -1-.
Installing Spring
– Insert the leg -A- of the spring into the guide -1- from above.
– Pull the leg -B- of the spring downward and lay it into the guide
from below.
Note
To improve clarity, the selector bracket is removed.
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
58 Rep. Gr.34 - Controls, Housing
To Next Page
Loading...
