User's Manual 1128 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description
[DigitPatternForwardOnDND]
Forward on No Reason Digit
Pattern (Internal)
configure voip > gateway
voice-mail-setting > fwd-no-
rsn-dig-ptrn-int
[DigitPatternForwardNoReaso
n]
Defines the digit pattern used by the PBX to indicate 'call forward
with no reason' when the original call is received from an internal
extension.
The valid range is a 120-character string.
Forward on Busy Digit Pattern
(External)
configure voip > gateway
voice-mail-setting > fwd-bsy-
dig-ptrn-ext
[DigitPatternForwardOnBusyE
xt]
Defines the digit pattern used by the PBX to indicate 'call forward on
busy' when the original call is received from an external line (not an
internal extension).
The valid range is a 120-character string.
Forward on No Answer Digit
Pattern (External)
configure voip > gateway
voice-mail-setting > fwd-no-
ans-dig-pat-ext
[DigitPatternForwardOnNoAns
werExt]
Defines the digit pattern used by the PBX to indicate 'call forward on
no answer' when the original call is received from an external line
(not an internal extension).
The valid range is a 120-character string.
Forward on Do Not Disturb
Digit Pattern (External)
configure voip > gateway
voice-mail-setting > fwd-dnd-
dig-ptrn-ext
[DigitPatternForwardOnDNDE
xt]
Defines the digit pattern used by the PBX to indicate 'call forward on
do not disturb' when the original call is received from an external line
(not an internal extension).
The valid range is a 120-character string.
Forward on No Reason Digit
Pattern (External)
configure voip > gateway
voice-mail-setting > fwd-no-
rsn-dig-ptrn-ext
[DigitPatternForwardNoReaso
nExt]
Defines the digit pattern used by the PBX to indicate 'call forward
with no reason' when the original call is received from an external
line (not an internal extension).
The valid range is a 120-character string.
Internal Call Digit Pattern
configure voip > gateway
voice-mail-setting > int-call-
dig-ptrn
[DigitPatternInternalCall]
Defines the digit pattern used by the PBX to indicate an internal call.
The valid range is a 120-character string.
External Call Digit Pattern
configure voip > gateway
voice-mail-setting > ext-call-
dig-ptrn
[DigitPatternExternalCall]
Defines the digit pattern used by the PBX to indicate an external call.
The valid range is a 120-character string.
Disconnect Call Digit Pattern
Defines a digit pattern that when received from the Tel side,
indicates the device to disconnect the call.
To Next Page
Loading...
