User's Manual 1196 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description
5 Dial the telephone number to which the call is forwarded (terminate the number with #); a
confirmation tone is heard.
Forward Deactivate
configure voip > gateway analog
keypad-features > fwd-
deactivate
[KeyCFDeact]
Defines the keypad sequence to deactivate any of the call forward
options. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Caller ID Restriction Parameters
Restricted Caller ID Activate
configure voip > gateway analog
keypad-features > id-restriction-
act
[KeyCLIR]
Defines the keypad sequence to activate the restricted Caller ID
option. After the sequence is pressed, a confirmation tone is
heard.
Restricted Caller ID Deactivate
configure voip > gateway analog
keypad-features > id-restriction-
deact
[KeyCLIRDeact]
Defines the keypad sequence to deactivate the restricted Caller ID
option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Hotline Parameters
Hot-line Activate
configure voip > gateway analog
keypad-features > hotline-act
[KeyHotLine]
Defines the keypad sequence to activate the delayed hotline
option.
To activate the delayed hotline option from the telephone, perform
the following:
6 Dial the user-defined sequence number on the keypad; a dial
tone is heard.
7 Dial the telephone number to which the phone automatically
dials after a configurable delay (terminate the number with #); a
confirmation tone is heard.
Hot-line Deactivate
configure voip > gateway analog
keypad-features > hotline-deact
[KeyHotLineDeact]
Defines the keypad sequence to deactivate the delayed hotline
option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Transfer Parameters
Note: See the description of the KeyBlindTransfer parameter for this feature.
Keypad Feature - Call Waiting Parameters
Call Waiting Activate
configure voip > gateway analog
keypad-features > cw-act
[KeyCallWaiting]
Defines the keypad sequence to activate the Call Waiting option.
After the sequence is pressed, a confirmation tone is heard.
Call Waiting Deactivate
configure voip > gateway analog
keypad-features > cw-deact
[KeyCallWaitingDeact]
Defines the keypad sequence to deactivate the Call Waiting
option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Reject Anonymous Call Parameters
Reject Anonymous Call Activate Defines the keypad sequence to activate the reject anonymous
To Next Page
Loading...
