AudioCodes Mediant 500L - Page 1242

User's Manual 1242 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description
required.
Answering Machine Detector (AMD) Parameters
For more information on AMD, see ''Answering Machine Detection (AMD)'' on page 210.
Answer Machine Detector
Sensitivity Parameter Suite
configure voip > media ipmedia >
amd-sensitivity-parameter-suit
[AMDSensitivityParameterSuit]
Global parameter that defines the AMD Parameter Suite to use.
You can also configure this functionality per specific calls, using
IP Profiles (IpProfile_AMDSensitivityParameterSuit). For a
detailed description of the parameter and for configuring this
functionality in the IP Profiles table, see ''Configuring IP
Profiles'' on page
438.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
Answer Machine Detector
Sensitivity Level
configure voip > media ipmedia >
amd-sensitivity-level
[AMDSensitivityLevel]
Global parameter that defines the AMD detection sensitivity
level of the selected AMD Parameter Suite. You can also
configure this functionality per specific calls, using IP Profiles
(IpProfile_AMDSensitivityLevel). For a detailed description of
the parameter and for configuring this functionality in the IP
Profiles table, see ''Configuring IP Profiles'' on page 438.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
AMD Sensitivity File
[AMDSensitivityFileName]
Defines the name of the AMD Sensitivity file that contains the
AMD Parameter Suites.
Note:
 This file must be in binary format (.dat). You can use the
DConvert utility to convert the original file format from XML
to .dat.
 You can load this file using the Web interface (see ''Loading
Auxiliary Files'' on page 791).
[AMDSensitivityFileUrl] Defines the URL path to the AMD Sensitivity file for
downloading from a remote server.
[AMDMinimumVoiceLength] Defines the AMD minimum voice activity detection duration (in
5-ms units). Voice activity duration below this threshold is
ignored and considered as non-voice.
The valid value range is 10 to 100. The default is 42 (i.e., 210
ms).
[AMDMaxGreetingTime] Global parameter that defines the maximum duration that the
device can take to detect a greeting message. You can also
configure this functionality per specific calls, using IP Profiles
(IpProfile_AMDMaxGreetingTime). For a detailed description of
the parameter and for configuring this functionality in the IP
Profiles table, see ''Configuring IP Profiles'' on page 438.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
[AMDMaxPostGreetingSilenceTime] Global parameter that defines the maximum duration of silence
from after the greeting time is over (defined by