AudioCodes Mediant 500L - Page 284

User's Manual 284 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description
Index
[HTTPRemoteServices_Index]
Defines an index number for the new table row.
Note:
 Each row must be configured with a unique index.
 The parameter is mandatory.
Name
rest-name
[HTTPRemoteServices_Name]
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters.
Note:
 Each row must be configured with a unique name.
 The parameter is mandatory.
Type
rest-message-type
[HTTPRemoteServices_HTTPT
ype]
Defines the type of service provided by the HTTP remote host:
 [0] Routing (default) = Routing service (also includes Call Status
and Topology Status).
 [1] Call Status = Call status service.
 [2] Topology Status = Topology status service (e.g., change in
configuration).
 [3] Capture = Recording of signaling and RTP packets, which
can be sent to a remote host, for example, to a Syslog server or
AudioCodes OVOC.
 [5] QoS = QoS-based call routing. For more information, see
Configuring QoS-Based Routing by Routing Server on page
292.
Note:
 You can configure only one remote Web service for each of the
following service types: Routing, Call Status, Topology
Status, and QoS.
 For the Topology Status option to be functional, you must
enable the functionality (see ''Enabling Topology Status
Services'' on page 289).
 If you do no configure the parameter to QoS, the device sends
QoS reports to the Topology server.
 The Routing option also includes the Call Status and Topology
Status services.
 Currently, the
Capture
option is not supported.
Path
rest-path
[HTTPRemoteServices_Path]
Defines the path (prefix) to the REST APIs.
The valid value is a string of up to 80 characters. The default is
"api".
Status
http-service-state
[HTTPRemoteServices_Service
Status]
(Read-only) Displays the status of the host associated with the
Web service.
 "Connected": At least one of the hosts is connected.
 "Disconnected": All hosts are disconnected.
 "Not In Service": Configuration of the service is invalid.
Connection
Policy
http-policy
[HTTPRemoteServices_Policy]
Defines the mode of operation when you have configured multiple
remote hosts (in the HTTP Remote Hosts table) for a specific
remote Web service.

[0] Round Robin = (Default) Load balancing of traffic across all