PARTNER
®
Advanced Communications System Installation, Programming, and Use
System Telephones
6-2
Figure 6-1. PARTNER-34D Telephone
The following buttons and indicators appear on system telephones:
■ Display (PARTNER-34D and PARTNER-18D telephones only). The display shows the
following:
— Date, day, and time when the telephone is idle
— Number dialed when placing a call
— Extension number (and name if programmed) calling you or transferring a call to you
— Duration while a call is in progress
— During programming, the settings, options, and prompts
To adjust the display contrast on the PARTNER-34D and PARTNER-18D telephones, press
* then - to decrease the brightness or + to increase the brightness, while the telephone is
idle and the handset is in the cradle.
Caller ID is available on all lines for which you subscribe to Caller ID service. Caller ID
information is the caller’s telephone number (and name, if available). When active on a call,
you automatically receive Caller ID information for the duration of the call. When an extension
is idle, you receive Caller ID information for a call coming in to your extension.
Caller ID is unavailable on T1 lines.
In Release 4.0 and later systems, you receive both the caller’s number and name on
a two-line display telephone while the call is ringing.
Intercom
ABC
2
DEF
31
JKL
5
MNO
6
TUV
8
WXYZ
9
0
GHI
4
PQRS
7
*
#
Intercom
Ext.
Message
PARTNER-34D
Display
Line/Programmable
Buttons
(32 with lights)
Programmable Buttons
(4 without lights)
Intercom Buttons
(2)
Message Light
Mic/
HFAI
Feature
+
–
Conf
HoldSpkr
Transfr
Feature
+
–
Conf
HoldSpkr
Transfr
Mic/
HFAI