Using the Telephones
Handling Calls
6-19
2. Dial
8 plus the two-digit line number.
3. Dial the telephone number.
To make an outside call using a specific pool:
1. Lift the handset.
You hear intercom dial tone.
2. Dial the three-digit pool access code (880, 881, 882, or 883).
3. Dial the telephone number.
Making an Intercom Call 6
An intercom call, or inside call, is a call between two extensions without using an outside line.
There are two ways you can signal the extension you are calling: by ringing or by voice.
To make an intercom call on a telephone:
1. Do one of the following:
■ For a system telephone:
a. Lift the handset or press
S before dialing.
b. Press an idle
i button (red and green lights are both off).
You hear intercom dial tone, and the green light next to the
i button is on
steady.
■ For a single-line telephone, lift the handset.
You hear intercom dial tone.
2. Do one of the following:
■ To ring the extension, dial the two-digit extension number.
■ To voice-signal a system telephone at the extension, press * plus the two-digit extension
number and listen for one of the following responses:
— If you hear one beep, you have reached an idle system telephone. You can speak
after the beep.
Your voice is heard through the other extension’s speaker. If the recipient is present,
he or she can reply.
— If you hear two beeps, you have reached a busy system telephone with Voice
Interrupt On Busy assigned. You can speak after the beeps. Be aware that the third
party to whom the recipient is speaking probably also hears the two beeps and the
faint sound of your voice. Be brief and discreet in your interruption. If the recipient has
a Voice Interrupt On Busy Talk-Back button, wait for a response.
You cannot make a voice-signaled call to an extension that has the Cell Phone Connect
feature active. (The call will not appear at the extension.)
To Next Page
Loading...
