Avaya PARTNER Advanced Communications System - Page 295

Programming & Using Telephone Features
Redialing Features
8-57
■ System Speed Dial numbers cannot be redialed with this feature.
■ A Last Number Redial number can begin with a star code; the system automatically inserts a
delay based on the Star Code Dial Delay setting.
■ A number dialed automatically by using the Caller ID Call Logging and Dialing feature can
be redialed with Last Number Redial.
■ Last Number Redial interrupts Call Screening (F25).
Programming 8
To program a Last Number Redial button:
1. Press
f00.
2. Press a programmable button.
3. Press
f05.
4. Program another button for this extension, or exit programming mode.
Using Last Number Redial on a System Telephone 8
To use Last Number Redial:
1. Lift the handset.
2. Press the programmed button or
f05.
Digits are displayed on system display telephones as they are dialed.
Using Last Number Redial on a Single-Line Telephone8
To use Last Number Redial:
1. Lift the handset.
You hear intercom dial tone.
2. Press
#05.