Avaya PARTNER Advanced Communications System - Page 443

Flow Charts
E-3
System Flow Chart—System Speed Dial numbers
11
System Flow Chart—Lines
To program a number:
Press
f00 to enter programming mode
Press
f
Dial a three-digit code (600-699)
Dial the telephone number—up to 28 digits including special characters.
To “mark” it (to override restrictions), dial * before the telephone #
To program another number, or to change a number, repeat:
Press
NP, enter a new extension # and
repeat above steps
Press
f00 to exit programming mode
To remove a number:
Press
f00 to enter programming mode
Press
f
Dial the System Speed Dial number’s code (600-699)
Press
!
To remove another number, repeat:
Press
f00 to exit programming mode
Direct Extension Dial Lines
Dial
#205
Dial a system line #
Dial 1=Assigned
2=Not Assigned

Press
n to program another line
Group Call Distribution
Dial #206
Dial a group number (1-6, 7 for VMS)
Dial
a system line #
Dial 1=Assigned
2=Not Assigned

3= VMS Line Cover
(only for Hunt Group 7)
Press
n to program another line
Line Coverage Extension
Dial #208
Dial a system line # then, a system extension #
No line owned by an extension

Press
n to program another line
Press
r to unassign ownership
Unique Line Ringing
Dial
#209
Dial a system line #
Dial 1

2-8
2.0
2.0
Dial
Mode
Dial #201
Dial a system line number
Dial 1=Touch-Tone

2=Rotary
Press
n to program another line
Hold Disconnect Time
Dial #203
Dial a system line #
Dial 00=No Detection,
01=50 msec, 02=100 msec, 03=150 msec
04=200 msec, 05=250 msec, 06=300 msec
07=350 msec, 08=400 msec, 09=450 msec

10=500 msec, 11=550 msec, 12=600 msec
Press
n to program another line
Automatic System Answer Lines
Dial 204
Dial a system line #
Dial 1=Assigned
2=Not Assigned

Press
n to program another line
2.0
Pool Line Assignment
Dial #207
Dial a system line #
Dial 1=No Pool
2=Main Pool 880

3=Pool 881
4=Pool 882
5=Pool 883
Press
n to program another line
3.0