Buttonholes
113
9.3 Using the Compensation Plate
For sewing a buttonhole in problematic fabrics, it is recommended to use the Height Compensation Tool
(optional accessory). The Height Compensation Tool can be used in combination with the Buttonhole Foot
with Slide #3A.
> Insert the compensation plate carefully from the side.
9.4 Marking Buttonholes
> For the buttonholes to be sewn manually, mark the position and the length on the fabric using chalk or a
water-soluble pen.
> For the buttonholes to be sewn automatically, mark the complete length of 1 buttonhole on the fabric
using chalk or a water-soluble pen. For any subsequent buttonholes mark the starting point.
To Next Page
Loading...
