Bernina 790 PRO - Editing the View; Inserting Points; Relocating the Points; Duplicating Points

Creative Sewing
81
> Tap «Stitch Designer».
> Tap «Create a New Stitch Pattern».
> Add a point on the display.
> Add more points on the display as desired.
> Tap «Confirm».
Editing the View
> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> To minimize the stitch pattern view, tap «Zoom Out».
> To enlarge the minimized stitch pattern view, tap «Zoom In».
> Tap «Move View».
> Moving the view of the design.
Inserting Points
> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> To show grid points, tap «Snap to Grid».
– Every inserted point is automatically placed on the nearest grid point.
> To select the point after which a new one is to be inserted, touch «Scroll Up».
> To select the point after which a new one is to be inserted, touch «Scroll Down».
> Insert further points.
> To undo the last work step, tap «Undo Entries».
> To redo the last work step, tap «Redo Entries».
Relocating the Points
> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> Tap «Select a Single Point».
> Tap «Select from a Particular Point».
> To add the previous point to the selection, tap «Scroll Up».
> To add the following point to the selection, tap «Scroll Down».
> To move the selected points horizontally, turn the «Upper Multi-function Knob».
> To move the selected points vertically, turn the «Lower Multi-function Knob».
Duplicating Points
> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».