Bernina 790 PRO - Narrow Edgestitching; Wide Edgestitching; Edgestitching Using the Seam Guide

Practical Stitches
96
> Tap «Practical Stitches».
> Select Double Overlock10.
6.14 Narrow Edgestitching
> Fit the Blindstitch Foot#5 or Edgestitch Foot #10/10C/10D.
> Tap «Practical Stitches».
> Select Straight Stitch1.
> Place the edge against the left-hand guide of the Blindstitch Foot.
> Select the left-hand needle position at the desired distance to the edge.
5/8
5/85/8
1
25
15 15
15
75
75
6.15 Wide Edgestitching
> Fit the Reverse Pattern Foot#1C.
> Tap «Practical Stitches».
> Select Straight Stitch1.
> Guide the edge along the presser foot or at a distance of 1– 2.5cm along the marks on the stitch plate.
> Select the needle position at the desired distance to the edge.
5/
8
5
/
85/
8
25 15 1
5
1
5
75
75
6.16 Edgestitching Using the Seam Guide
When sewing parallel wider lines, it is recommended to guide the seam guide along the sewn of lines.
> Fit the Reverse Pattern Foot#1C.
> Tap «Practical Stitches».
> Select Straight Stitch1.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole in the presser foot.
> Adjust the width as required.
> Tighten the screw.