Bernina 790 PRO - Reinforced Darning, Automatic; Reinforced Darning

Practical Stitches
94
6.10 Reinforced Darning, Automatic
The Reinforced Darming Program 23 is particularly suitable for quick darning of worn areas or tears. The
Reinforced Darming Program 23 replaces the longitudinal threads in all fabrics.
If the Darning Program does not cover the whole worn or damaged area, it is recommended to
reposition the work and the sew the Darning Program again. The length is programmed and can be
repeated as often as desired.
> Fit the Buttonhole Foot with Slide#3A.
> Tap «Practical Stitches».
> Select Reinforced Darning Program23.
> Hoop light-weight materials in the round embroidery hoop (optional accessory).
– The darning area stays evenly taut and cannot be distorted.
> Start sewing top left.
> Sew the first row.
> Stop the machine.
> Push the button «Quick Reverse».
– The darning length is programmed.
> Finish sewing the Darning Program.
– The machine stops automatically.
6.11 Reinforced Darning
The Darning Stitch34 is particularly suitable for damaged areas on heavy or strong fabrics, e.g. jeans and
work clothes.
> Fit the Reverse Pattern Foot#1C.