Bernina 790 PRO - Sewing the Manual 7-Step Buttonhole; Sewing the Manual 5-Step Buttonhole

Buttonholes
119
> To program the length, push the button «Quick Reverse».
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
9.12 Sewing the Manual 7-step Buttonhole
The length of the buttonhole is determined manually when sewing. The bartack, eye and securing stitches
are preprogrammed. The individual steps can be selected by scrolling with the arrow icons, by direct
selection or by pressing the button «Quick Reverse».
• The Buttonhole Foot with Slide#3A is fitted.
> Tap «Buttonholes».
> Select Standard Buttonhole51.
> Tap «i-Dialog».
man
> Tap «Manual Length Adjustment».
– Step1 is activated in the display to start the buttonhole.
> Sew the desired length of the buttonhole.
– Step2 becomes active when sewing starts.
2
3
4
5
6
1
> Stop when the required length of the buttonhole or the length marking is reached.
> Step3 appears by tapping «Scroll Down».
– The machine sews straight stitches in reverse.
> Stop the machine at the level of the first stitch at the start of the buttonhole.
> Step4 appears by tapping «Scroll Down».
– The machine sews the upper bartack and stops automatically.
> Step5 appears by tapping «Scroll Down».
– The machine sews the second bead.
> Stop the machine at the level of the last stitch of the first bead.
> Step6 appears by tapping «Scroll Down».
– The machine sews the lower bartack and stops automatically.
> Step7 appears by tapping «Scroll Down».
– The machine secures and stops automatically.
9.13 Sewing the Manual 5-step Buttonhole
The length of the buttonhole is determined manually when sewing. The bartack, eye and securing stitches
are preprogrammed. The individual steps can be selected by scrolling with the arrow icons, by direct
selection or by pressing the button «Quick Reverse».
• The Buttonhole Foot with Slide#3A is fitted.