Bernina 790 PRO - Programming Pattern Repeat; Changing the Sewing Direction of a Stitch Pattern; Changing the Sewing Direction of a Stitch Pattern Combination; Administering Stitch Patterns

Creative Sewing
77
> Tap «i-Dialog».
> Tap «Relocating a Single Pattern or Parts of a Combination».
> Relocate a part of the stitch pattern combination.
Programming Pattern Repeat
• A stitch pattern combination has been created.
> Tap «i-Dialog».
> Tap «Edit Entire Combination».
x
> To repeat the stitch pattern combination, tap «Pattern Repeat» 1x.
> To repeat the stitch pattern combination up to 9x, tap «Pattern Repeat» again.
> To deactivate the pattern repeat, tap and hold «Pattern Repeat» or tap «Clear Settings».
Changing the Sewing Direction of a Stitch Pattern
• A stitch pattern combination has been created.
> Tap «Edit Mode/Extended Edit Mode».
> Select the desired stitch pattern within the stitch pattern combination.
> Tap «i-Dialog».
> Tap «Change the Sewing Direction».
> To rotate the stitch pattern combination in 0.5° steps, turn the «Upper Multi-function Knob» or «Lower
Multi-function Knob».
Changing the Sewing Direction of a Stitch Pattern Combination
• A stitch pattern combination has been created.
> Tap «Edit Mode/Extended Edit Mode».
> Tap «i-Dialog».
> Tap «Edit Entire Combination».
> Tap «Change the Sewing Direction».
> To rotate the stitch pattern combination in 0.5° steps, turn the «Upper Multi-function Knob» or «Lower
Multi-function Knob».
5.7 Administering Stitch Patterns
Saving Settings of Stitch Patterns
> Select a stitch pattern, alphabet or buttonhole.
> Tap «i-Dialog».
> Edit the stitch, alphabet or buttonhole.