EasyManua.ls Logo

Bernina 790 PRO - Switching On;Off the BERNINA Dual Feed; Regulating the Speed

Bernina 790 PRO
250 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Creative Sewing
66
Fleece-types of fabrics
Batted fabrics
Stripes and checks
Curtain fabrics with pattern repeats
«Sticky» fabrics are:
Imitation leather, coated fabrics (optimally with optional accessory Zigzag Foot with Non-Stick Sole#52D)
Switching On/Off the BERNINA Dual Feed
Only use the Dual Feed presser feet with a cut-out at the center back and the labeling «D».
Activating the BERNINA Dual Feed
> Raise the presser foot.
> Attach a presser foot with the designation «D».
> Pull the dual feed down until it engages.
Deactivating the BERNINA Dual Feed
> Raise the presser foot.
> Hold the dual feed by the handle with two fingers, pull it down and then push it away from you and let it
slide slowly upwards.
5.3 Regulating the Speed
The sewing speed can be adjusted infinitely variable with the slide.
> Move the slide to the left to reduce the sewing speed.
> Move the slide to the right to increase the sewing speed.

Table of Contents

Related product manuals