Bernina 790 PRO - System Settings; Calling up the Tutorial; Calling up the Creative Consultant; Calling up the Embroidery Consultant

System Settings
64
4 System Settings
4.1 Calling Up the Tutorial
The Tutorial gives information and explanations, covering various aspects of sewing, embroidering, and the
different stitches.
> Tap «Tutorial».
> Select the desired topic in order to view information.
4.2 Calling Up the Creative Consultant
The Creative Consultant provides decision support for sewing projects. After entering the kind of fabric and
the desired sewing project, suggestions concerning the suitable needle or the appropriate presser foot are
displayed.
> Tap «Creative Consultant».
> Select the fabric on which you want to sew.
> Select the sewing project.
> Tap «Confirm».
– The settings are adjusted.
4.3 Calling up the Embroidery Consultant
The Embroidery Consultant informs you about decision support for embroidery projects. After entering the
desired embroidery project and the fabric, suggestions for the suitable needle and the suitable embroidery
foot are displayed.
> Tap «Embroidery Consultant».
> Select the embroidering project.
> Select the fabric on which you want to embroider.
> Tap «Confirm».
– If an embroidery motif has already been selected, a warning appears stating that this will be
overwritten.
4.4 Calling Up the Help
> Touch the window in the display where help is needed.
> To start the Help Mode, tap «Help» twice.
> Tap the icon in the display where help is needed.
4.5 Using eco Mode
During a longer interruption of work the machine can be set into a power save mode. The power save mode
also serves as a child safety feature. Nothing can be selected in the display and the machine cannot be
started.
> To activate the power save mode, tap «eco Mode».
– The display goes to sleep. The power consumption is reduced and the sewing light is off.
> To deactivate the power save mode, tap «eco Mode» again.
4.6 Cancelling Any Alterations with «clr»
Any alterations to designs can be reset to basic setting. Exceptions are saved designs which have been filed
in the personal memory and monitoring functions.
> Tap «Clear Settings».