Bernina 790 PRO - Threading; Threading the Upper Thread

Sewing Preparation
45
2.11 Threading
Threading the Upper Thread
From a needle size of 70, the upper thread can be automatically threaded into standard sewing needles and
embroidery needles.
• The needle and the presser foot are raised.
• The machine is switched off.
> Place the foam pad on the spool pin.
> Place the thread spool on the spool pin so that the thread unwinds clockwise.
> Attach the appropriate spool cap.
> Guide the thread in direction of the arrow through the rear thread guide(1) and hold the thread with the
hands so that it is taut and can be inserted into the thread tension.
> Guide the thread in direction of the arrow through the thread tension(2).
1
2
> Guide the thread downwards (3) around the thread take-up lever cover(4).
> Guide the thread upwards and insert into the thread take-up lever(5).
> Guide the thread downwards again(6).
3
4
5
6