Bernina 790 PRO - Stitch Pattern Combination Subdivider 1; Stitch Pattern Combination Subdivider 2; Securing a Stitch Pattern Combination; Relocating Several Stitch Patterns

Creative Sewing
76
Stitch Pattern Combination Subdivider 1
A stitch pattern combination can be subdivided into several sections. The subdivision is inserted below the
cursor. Only the section in which the cursor is placed will be sewn. To sew the next section, the cursor must
be placed in this section.
• A stitch pattern combination has been created.
> Select the desired position within the stitch pattern combination where the stitch pattern combination is
to be subdivided.
> Tap «i-Dialog».
> Tap «Edit Combination at Cursor Position».
> Tap «Combination Subdivider (1)».
Stitch Pattern Combination Subdivider 2
A stitch pattern combination can be interrupted at different positions. The interruption is inserted below the
cursor.
• A stitch pattern combination has been created.
> Select the desired position within the stitch pattern combination where the stitch pattern combination is
to be interrupted.
> Tap «i-Dialog».
> Tap «Edit Combination at Cursor Position».
> Tap «Combination Subdivider (2)».
> Sew stitch pattern combination up to the interruption and reposition the fabric.
Securing a Stitch Pattern Combination
• A stitch pattern combination has been created.
> Select the desired position within the stitch pattern combination where the stitch pattern combination is
to be secured.
> Tap «i-Dialog».
> Tap «Edit Combination at Cursor Position».
> Tap «Securing Stitches».
– Every single pattern of the stitch pattern combination can be secured at the start or at the end.
Relocating Several Stitch Patterns
• A stitch pattern combination has been created.
> Tap «Edit Mode/Extended Edit Mode».
> Select the stitch pattern within the stitch pattern combination.