Bernina 790 PRO - Sewing Preparation; Before Using the Machine for the First Time; Accessories Box; Accessory Box Free Standing

Sewing Preparation
34
2 Sewing Preparation
2.1 Before Using the Machine for the First Time
BERNINA recommends lubricating the hook before using the machine for the first time or after a longer
period of non-use. (177)
By oiling the hook, the occurrence of unwanted noises in the hook area can be avoided.
2.2 Accessories Box
Accessory Box Free Standing
> On the back of the box, pull both extensions out until they click into place.
Storing Accessory
2
3
4
6
7
5
1
1
1
1
1
> Insert the holders(1) for bobbins, presser feet and needles into the accessory box.
> Store the presser feet in the holders (7) (5.5mm or 9.0mm).
> Store the small parts, e.g. thread discs etc., in the drawers (2) and (3).
> Buttonhole Foot with Slide#3A in compartment (4).
> Store the provided needle package in the special compartment (5).
Scratched Sensor Surfaces of the Bobbin
Malfunction of the lower thread indicator. If the sensor surfaces of the bobbins are scratched or dirty, the
bobbin thread indicator will no longer detect the low thread level.
> Always position the bobbins in the bobbin holder with the silver sensor surface to the right.
> Position the bobbins in the bobbin holder(6) with the silver sensor surface to the right.
> To remove a bobbin, press the compartment holder down.