Bernina 790 PRO - Sewing Visible Hems

Practical Stitches
98
• The fabric edges are finished.
> Fit the Blindstitch Foot#5.
> Tap «Practical Stitches».
> Select Blind Stitch9.
> Fold the fabric so that the finished fabric edge is on the right side.
> Place the fabric under the presser foot and move the folded edge against the metal guide on the presser
foot.
> Guide the folded edge evenly along the metal guide of the presser foot to sew the stitches evenly deep.
– Make sure that the needle only pierces the edge of the fold.
> After sewing about 10cm, check both sides of the fabric and adjust the width again if necessary.
5/8
5/8
5/8
1
25 15 15
1
5
75
75
6.19 Sewing Visible Hems
The visible hem is particularly suitable for elastic seams in tricot made of cotton, wool, synthetic and mixed
fibers.
> Fit the Reverse Pattern Foot#1C/1D.
> Tap «Practical Stitches».
> Select Tricot Stitch14.
> Iron the hem and baste if necessary.
> Reduce the presser foot pressure if necessary.
> Sew the hem in the desired depth on the right side of the fabric.
> Trim off the remaining fabric on the wrong side of the fabric.