Bernina 790 PRO - Embroidery Preparation; Attaching the Module; Preparing the Machine; Lowering the Feed Dog

Embroidery Preparation
136
13 Embroidery Preparation
13.1 Attaching the Module
Transporting the Embroidery Module
Damage to the embroidery module connection and machine.
> Remove the embroidery module before transporting the machine.
• Extension table must not be fitted.
> Make sure that the module and the machine are placed on a stable, even surface.
> Ensure that the embroidery arm can move freely.
> Lift the embroidery module on the left side.
> Carefully push the module from left to right into the embroidery module connection(1) of the machine.
1
1
> To remove, lift the embroidery module on the left and carefully pull to the left.
13.2 Preparing the Machine
Lowering the Feed Dog
> Push the button «Feed Dog Up/Down».