Bernina 790 PRO - Threading the Twin Needle; Threading the Triple Needle

Sewing Preparation
46
> Guide the thread through the guides(7/8) above the presser foot.
7
8
9
> Guide the thread into the thread clamp(9) and pull it from the back to the front over the thread cutter.
> Switch the machine on.
> Push the button «Automatic Needle Threader».
– The thread is threaded into the needle.
Threading the Twin Needle
• The twin needle is inserted.
> Guide the first thread in direction of the arrow on the right side of the tension disc (1).
> Guide the second thread in direction of the arrow on the left side of the tension disc (1).
1
> Guide the first and the second thread to the thread guide above the needle.
> Thread the first thread manually into the right needle.
> Thread the second thread manually into the left needle.
Threading the Triple Needle
• The triple needle is inserted.
> Place the foam pad, the thread spool and the appropriate spool cap on the horizontal spool pin.
> Place the foam pad on the vertical spool pin.