28 MAX Operation & Service Manual28 Section4:UnderstandingTheTabletInterface MAX Operation & Service Manual
Sleep Mode
The tablet screen will turn off after 5 minutes of no activity. After 10 minutes of no activity the tablet
will go into sleep mode. To wake the tablet, press anywhere on the tablet screen.
Removable Tablet
The Max is supplied with an external power supply so you can remove the tablet from the machine to
change information, check counters, or design/edit patterns. This can be performed at a desk or work
station.
Security
Access to machine operations can be controlled by assigning Personal Identication Numbers (PINs)
that prevent unauthorized access to the machine or its programs. Additionally, each user can be assigned
one of three available levels of access based on their job function
See the Setting up PINs, later in this section for more info on security levels and pin access.
Messages
Status messages: Status messages display in the lower right area of the control screen and remain
visible on the screen until another status message is displayed. Status messages describe general
information about the machine’s current and normal operations. Examples:ready,running.
Alert messages: Low level messages to keep you informed if about system operation parameters are
beginning to change. Example: cleanerpressureisalittlelow.
Warning messages: Warning messages alert you to minor issues that need to be addressed. Example:
lowcleaneruid.
Error messages: Error messages alert you to operational issues that need to be addressed. An error
message will stop the machine from running until the problem has been corrected. Example: Squeegee
switch is not working properly.
Maintenance messages: Maintenance messages are warning messages that tell you when a replaceable
part has reached its useful life. Maintenance messages display during start-up. Maintenance messages
will not prevent the machine from running . Example: dusterclothneedstobereplaced.
To Next Page
Loading...
