Brunswick MAX - Emergency Stop Procedures

88 MAX Operation & Service Manual88 Section 5: Operating The Machine MAX Operation & Service Manual
EMERGENCY STOP
In the event that you need to stop the machine in an emergency while it is operating on the lane, there
are three possible safe options:
Option 1 (Battery or Corded Operation)
The E-stop button in the top center of the machine will shut down all power when depressed. Twist the
top of the switch clockwise and release to turn power back on. (This is also a good one to check if you
cannot turn the machine on!)
Option 2 (Corded Operation)
If an AC power cord is being used, the cord kill switches on the left or right rear of the machine will
stop the travel and functions of the machine when the power cord is pulled rmly by the operator.
The operators choices after this are:
• Press “OK” to continue operations.
• Press “ReturntotheFoulLine”.
• Press “StopRunning” to stop all functions.