102 MAX Operation & Service Manual102 Section 6: Maintenance & Service MAX Operation & Service Manual
TABLET MAINTENANCE MESSAGES
Certain wear components have specic life expectancies they should achieve before they need
replacing. In some situations such as lanes with surface issues or environments that are very dirty the
wear can be accelerated and life expectancy shortened.
The Tablet maintains a count of the total number of lanes run as well as the amount of time the motors
are in use. This information is used to trigger resetable counters for specic components listed in the
Diagnostics - Counters”. Once the counter threshold has passed for a component, the Tablet will display
the warning message until the component is replaced and its counter reset. The warning message
will always appear with the heading“Warning: A hardware counter has expired…” and the specic
component(s) listed. Refer to Figure 6-7.
Figure6-7.TabletMaintenanceMessages
Below is a list of all the counters and the expected life (in lanes or in hours) for each component
monitored by the Tablet. Refer to MaintenanceCountersinSection4-UnderstandingtheTablet
interface for instructions on resetting a counter.
NOTE: TheSpin-onlterisrecommendedtobereplacedafter29,200lanesorwhenever
switchingbrandsoflaneconditioner.
NOTE: Inspectandrotatethesqueegeeabsorbentwipeandurethanebladetoplacethe
oppositeedgeinuseevery3monthsor5,000lanes.Replaceifneeded.
Quick-list of Maintenance Counters
Buffer Lanes 29,200 lanes
Squeegee Lanes Replace 14,600 lanes
Duster Lanes 1,000 lanes
Oil Filter Lanes 14,600 lanes
Cleaner Filter Lanes 1,200 lanes
Spin-On Filter Lanes 29,200 lanes
Absorbent Wiper Lanes Replace 5,000 lanes
Drive Motor Hours 5,000 hours
Vacuum Motor Hours 500 hours
Lithium Battery 1,600 cycles (approximately 4 years in a 40 lane center
Lane Length and Runtime As Needed
Lanes Per Stop As Needed