Brunswick MAX - Lane Selection and Pattern Overrides

30 MAX Operation & Service Manual30 Section4:UnderstandingTheTabletInterface MAX Operation & Service Manual
Changing the Start Lane
1. Touch the number wheel for the “Start Lane”, with your nger.
2. Swipe your nger up or down to change the “Start Lane”.
NOTE: Whenyouleavetheoperatorscreen,thelanemachinewillreturntoitsdefault“start
lane”settings
Changing the End Lane
1. Touch the number wheel for the “End Lane”, with your nger.
2. Swipe your nger up or down to change the “End Lane”.
NOTE: Whenyouleavetheoperatorscreen,thelanemachinewillreturntoitsdefault“start
lane”settings.
Skipping or Repeating Lanes
If you want to skip or repeat lanes during a session, you must change the “Current Lane” so the machine
can maintain your place in the process. If you skip lanes, the tablet will direct you to return to the lowest
lane once you’ve completed the last lane in the normal sequence (the end lane).
1. Touch the number wheel for the “End Lane”, with your nger.
2. Swipe your nger up or down to change the “End Lane”.