MAX Operation & Service Manual 91MAX Operation & Service Manual Section 6: Maintenance & Service 91
Section 6: Maintenance & Service
All machines need regular maintenance to stay in good working condition. The MAX was designed
to make routine maintenance easy—parts are located where you can get to them and maintenance
procedures are logical and simple to follow.
In this section you will nd:
1. Checklist for daily maintenance
2. Checklist for weekly maintenance
3. Checklist for annual maintenance
4. Quick-List of “Counter” limits
5. Step-by-step instructions for replacing, servicing, and adjusting machine components
BEFORE YOU PERFORM ANY MAINTENANCE
Before undertaking any maintenance, you should be familiar with the following Maintenance
precautions and all of the Safety precautions noted in Section 1: Safety. In order to safely maintain
this machine, you must be trained in the procedures in this manual, including the use of common
mechanic’s hand tools and any special Brunswick tools. For clarication on any of this information,
please contact your authorized Distributor or Brunswick Technical Support (BTS) in the United
States at 1-800-YES-BOWL, or internationally at 231-725-4966. For non emergency support, e-mail
techsupport@brunswickbowling.com
Always perform maintenance in an open area, away from lanes and approaches.
DAILY MAINTENANCE
WARNING! Before performing maintenance, be sure the power cord is
disconnected from both the machine and the wall outlet. Replace the
protective sleeve and heat shrink tubing on the power cord if they become
damaged.
WARNING! Brunswick recommends using a partner whenever possible to
help with lifting or lowering the machine from the operating position. Take care
when lowering this machine into the operating position. Use proper lifting and
lowering techniques such as bending at the knees and using a back support, if
needed.
Refer to the Daily Maintenance Decal and Location information in Section 1, Figure 1-3.
To Next Page
Loading...