Brunswick MAX - Session and Status Information

34 MAX Operation & Service Manual34 Section4:UnderstandingTheTabletInterface MAX Operation & Service Manual
Temperature Cycle Override
Allows you to override a previously scheduled Temperature Cycle operation. To turn on the
Temperature Cycle, touch the Temp. Cycle box and the status will change from OFF to ON.
NOTE:All“Overrides”willbedisplayedinredtextforeachspecicoverridefunction.
Last Charged Box
The date/time that the battery was last fully charged. This is intended to assure that the previous
operator properly charged the battery when expected. The MAX keeps detailed log les of the battery
voltage every ve minutes while charging.
Last Runtime
Displays the amount of time the machine needed to complete the previous lane. The runtime for each
Forward Speed is monitored and will change between a yellow or red value if the speeds fall outside of
the desired parameters.
Login and Logout Button
This option is only available if the Security is set up for the various operators. The feature makes the
user accountable for their session on the lane machine. To Logout, touch the button and the screen will
prompt the next user to enter in their PIN number. Refer to Figure4-7.
Figure4-7.LoginScreen