Brunswick MAX - Page 54

54 MAX Operation & Service Manual54 Section4:UnderstandingTheTabletInterface MAX Operation & Service Manual
Procedure for Creating a Local Backup
1. Go to the Pattern menu and select Data.
2. Select Local Backup and the machine settings will be saved to the tablet memory. Refer to
Figure4-25.
Procedure for Restoring a Local Backup
1. Go to the Pattern Menu and select Data
2. Select Local Restore and the machine settings will revert back to the last saved data. Refer to
Figure4-25.
Procedures for Creating a USB Backup
1. Go to the Pattern Menu and select Data.
2. Insert a USB drive into the USB port on the right side of the tablet.
3. Select USB backup and the data will appear in a backup folder on the USB drive. Refer to
Figure4-25.
Procedures for Restoring a USB Backup
1. Go to the Pattern Menu and select Data.
2. Insert the USB drive into the USB port on the right side of the tablet.
3. Select USB Restore and the screen will show a list of backups on the USB drive.
4. Select the backup folder you wish to restore and you will receive a message asking if you wish
to continue. Press “OK” and the machine data will revert to the data on the selected backup.
NOTE: Itisgoodpracticetocreateabackuppriortorestoring.TheLogFileswillnotover
writeexistingLogsonatablet.Loglescannotbeeditedordeleted.