Brunswick MAX - Page 56

56 MAX Operation & Service Manual56 Section4:UnderstandingTheTabletInterface MAX Operation & Service Manual
There are ve screen options in the System menu.
Center - Displays the name of the bowling center and the total number of lanes. It also displays the
machine type, battery type, tablet serial number, machine installation and tablet manufacturing date. At
the bottom of the screen, you will see the user interface software version as well as the machine control
version inside the electronic enclosure. There is an active button, at the bottom of the screen used to
search for software updates.
Security - Lets you control who has access to the machine’s operation and programming.
Global Settings - Allows you to set parameters such as date and time, date format, language, and
temperature (Fahrenheit/Celsius).
Machine Settings - Allows you to set machine parameters such as starting the squeegee and cleaner
spray, distance oil begins from the foul line, squeegee wipe delay, and the distances to turn ON the
vacuum motor going forward as well as turning OFF on the return. At the bottom of the screen you can
select and change the conditioner selection.
Temperature Cycle Scheduler - Lets you set a schedule to start heating the oil prior to starting the
lanes.
System Center
The “Center” screen allows you to enter the name and number of bowling lanes in the center. It is very
important to have the correct number of lanes if you are using the scheduler option. Refer to Figure
4-26.
NOTE: ABrunswickinstallerwillsetupthisscreenwiththenameofyourcenterandthe
numberoflanes.
Entering the Name of Your Bowling Center
1. Go to the System menu.
2. Select the eld under the Center Name
3. When the keyboard appear, type in the name.
Entering the Number of Lanes
1. Select the number of lanes by swiping the scroll wheel up or down.
IMPORTANT!:Ifyouchangethenumberoflanesafterinitialsetup,youmayhaveto
updateyourpatternscheduler(thepatternschedulerusesthenumberoflanesenteredherein
establishingschedules).
2. Exit to another menu to save changes.