Case SDX30 - User Manual

SDX30/SDX40
Single Disk No-Till Air Drill
Repair Manual
87605427
Issued May, 2007
Replaces
6-12432

Summary

Section 1 SAFETY

SAFETY

Covers general safety practices, servicing precautions, operation, and specific hazards like air, hydraulics, electrical, tires.

DECAL LOCATIONS

Details the placement of safety decals for SDX30 and SDX40 models.

REFLECTOR DECALS, SLOW MOVING VEHICLE SIGN AND TRANSPORT LIGHTING

Information on decals, SMV signs, and lighting for safe transport.

Section 2 MECHANICAL SERVICE

GENERAL SERVICE INFORMATION

Provides essential information for general service, including bolt torque and implement dimensions.

LOCKING OPENERS; SUBBAR FOR SERVICE

Instructions on how to secure openers and subbar for safe servicing.

GREASE LOCATIONS and GENERAL MAINTENANCE

Details daily maintenance tasks and specific grease points for the machine.

STORAGE

Procedures for preparing the drill for storage and removing it.

WELDING PROCEDURES

Guidelines and safety precautions for welding on the implement.

FOLD LINKAGES

Procedures for securing the frame and assembling/disassembling fold linkages.

WHEEL BOLT TORQUE

Specifies torque values for wheel bolts to ensure proper assembly.

HUB; SPINDLES; WHEELS

Covers maintenance and service for hubs, spindles, and wheels.

Section 3 HYDRAULIC SYSTEM SERVICE

HYDRAULICS

Discusses hydraulic system bleed procedures, hazards of fluid leaks, and sealant usage.

HYDRAULIC CYLINDER SEAL REPLACEMENT

Step-by-step guide for removing, disassembling, and reassembling hydraulic cylinders.

HYDRAULIC CYLINDER COMPONENTS

Lists and illustrates components for subbar and wing lift cylinders.

WING LIFT HYDRAULIC SCHEMATICS

Provides hydraulic schematics for wing lift systems for different serial ranges.

SUBBAR HYDRAULICS

Details hydraulic schematics for subbar systems for different serial ranges.

Section 4 ELECTRICAL SYSTEM SERVICE

ELECTRICAL SYSTEM SERVICE

Covers replacement of turn signal, flasher, and tail lamp bulbs.

CLUTCHES AND WORK SWITCH

Explains the function and adjustment of remote clutches and work switches.

CONNECTOR SERVICE KIT

Provides detailed procedures for connector maintenance, removal, and insertion.

Section 5 OPENER SERVICE

TROUBLESHOOTING TABLES

Lists common problems with openers and their possible causes and solutions.

ADJUSTMENTS

Details general adjustments, down pressure, scraper, gauge wheel, and seed firming wheel adjustments.

OPENER SERVICE

Covers servicing of gauge wheel, packer wheel, seed firming wheel, scraper, seed tube, and cast arm bushings.

Section 6 AIR SYSTEM SERVICE

TROUBLESHOOTING TABLES

Lists common air system problems and their causes and solutions.

SINGLE RANK OPERATION

Explains how to operate the drill in single rank mode for different air systems.

SETTING THE FAN SPEED - CONCORD AIR SYSTEMS

Provides charts for setting fan speed based on application rate and ground speed.

HOSES

Details the installation, routing, and inspection of primary and secondary hoses.

THEORY OF OPERATION - AIR SYSTEM

Explains the principles of air system operation, including balancing air flow.

TO DETERMINE ADEQUATE CARRYING VELOCITIES

Describes the open hose method for checking air velocity and product delivery.

AIR SYSTEM COMPONENTS - CONCORD AIR SYSTEM

Lists and illustrates components for manifold stands and manifolds.

AIR SYSTEM COMPONENTS - ADX AIR SYSTEM

Details components for ADX air system header assemblies.

Section 7 ENDMARKER SERVICE

ENDMARKERS

Covers safety during operation and a troubleshooting table for endmarker issues.

SDX30 ENDMARKER

Details assembly and adjustments for the SDX30 endmarker.

SDX40 ENDMARKER

Covers assembly and adjustments for the SDX40 endmarker, including disc angle and breakaway.

ENDMARKER SERVICE

Provides instructions for bearing replacement in endmarkers.

Case SDX30 Specifications