Case SDX30 - Pivot Assembly Manifold Stands

SECTION 6 - AIR SYSTEM SERVICE
page 6-14
Pivot Assembly Manifold Mount Parts
202061C
PIVOT ASSEMBLY MANIFOLD STANDS
REF DESCRIPTION REF DESCRIPTION
1 FITTING 1/4-28 TAPER THREAD 8 BUSHING POLYLUBE 1.25OD 1 ID
2 NUT, LOCK .5 UNC GR A YZD NYL LK 9 ARM ASSY. PRIMARY MANIFOLD STAND
3 BOLT 1/2-13 X 8 GR 5 ZND. 10 PLATE BOLTING
4 NUT .375 UNC GR5 YZD 11 SUPPORT ASSY. STAND/W PRIMARY
MANIFOLD
5 PIN, COTTER .188 X 1.5 YZD 12 MOUNTING SNGL PRIMARY MANIFOLD
6 WASHER 1.062ID X2 X11GA YZD 13 BOLT "U" UR .375 5.188W 3.657D
7 WASHER 2.5 ID 4OD .188 YZD
Pivot Assembly Manifold Mount Parts