SECTION 5 - OPENER SERVICE
page 5-15
Scraper Assembly
202292S
SCRAPER ASSEMBLY
1. Ensure all components are free of foreign materials
such as dirt, straw or fertilizer.
2. Remove the nuts (18) and spring (15) holding the
scraper (16) to the scraper bracket (14).
3. Inspect the scraper for wear. Replace if necessary.
Scrapers should be replaced if the bottom edge of the
scraper is worn more than 12 mm (1/2") or when seed
placement is affected.
4. Assemble the scraper (16) to the scraper bracket (14).
IMPORTANT: Proper seeding depth will be
compromised if the bottom of the
scrapers become worn. Scrapers
should be replaced if they are worn
12 mm (1/2").
To Next Page
Loading...
