Cisco 500 Series Administration Guide

Security: 802.1X Authentication
802.1X Configuration Through the GUI
Cisco 500 Series Stackable Managed Switch Administration Guide 506
22
• Password Textbox—Select for a password textbox to be displayed.
• Password Textbox Label—Select the label to be displayed before the
password textbox.
• Language Selection—Select to enable the end user to select a language.
• Language Dropdown Label—Enter the label of the language selection
dropdown.
• Login Button Label—Enter the label of the login button.
• Login Progress Label—Enter the text that will be displayed during the login
process.
STEP 8 Click Apply and the settings are saved to the Running Configuration file.
STEP 9 Click Edit4. The following fields are displayed:
• Terms and Conditions—Select to enable a terms and conditions text box.
• Terms and Conditions Warning—Enter the text of the message to be
displayed as instructions to enter the terms and conditions.
• Terms and Conditions Content—Enter the text of the message to be
displayed as terms and conditions.
STEP 10 Click Apply and the settings are saved to the Running Configuration file.
STEP 11 Edit5. The following fields are displayed:
• Copyright—Select to enable displaying copyright text.
• Copyright Text—Enter the copyright text.
STEP 12 Click Apply and the settings are saved to the Running Configuration file.

Cisco 500 Series Specifications

General

Model	Cisco 500 Series
Category	Switch
Mounting	Rack-mountable
Management	Web-based, CLI, SNMP
Ports	24, 48
Port Speed	10/100/1000 Mbps
PoE Support	Available on some models
Switching Capacity	Up to 176 Gbps
MAC Address Table Size	16, 000 entries
Security	ACLs, 802.1X
Quality of Service (QoS)	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Power Supply	Internal
Power Consumption	Varies by model
Jumbo Frame Support	Up to 9216 bytes