Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Example:

RP/0/RSP0/CPU0:router# configure

Enters Global Configuration mode.

Step 2 l2vpn

Example:

RP/0/RSP0/CPU0:router (config)# l2vpn

Enters Layer 2 VPN configuration mode.

Step 3 pw-class class-name

Example:

RP/0/RSP0/CPU0:router (config-l2vpn)# pw-class class_cem

Enters pseudowire class submode, allowing you to define a pseudowire class template.

Step 4 encapsulation mpls

Example:

RP/0/RSP0/CPU0:router (config-l2vpn-pwc)# encapsulation mpls

Sets pseudowire encapsulation to MPLS.

Step 5 protocol ldp

Example:

RP/0/RSP0/CPU0:router (config-l2vpn-pwc-encap-mpls)# protocol ldp

Sets pseudowire signaling protocol to LDP.

Step 6 end

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-pwc-encap-mpls)# end

System prompts you to commit changes:

Uncommitted changes found, commit them before exiting(yes/no/cancel)?[cancel]:

• • Entering yes saves configuration changes to the running configuration file, exits the configuration session,

and returns the router to EXEC mode.

• Entering no exits the configuration session and returns the router to EXEC mode without committing the

configuration changes.

• Entering cancel leaves the router in the current configuration session without exiting or committing the

configuration changes.

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

145

Implementing Point to Point Layer 2 Services

Associating a Pseudowire Class

Cisco ASR 9000 Series Configuration Guidelines

Other manuals for Cisco ASR 9000 Series