Cisco ASR 9000 Series Configuration Guidelines

pbb edge i-sid 1000 core-bridge PBB-CORE
!
!
!
Configuring PBB Core Bridge Domain: Example
This example shows how to configure the PBB core bridge domain:
config
l2vpn
bridge group PBB
bridge-domain PBB-CORE
interface G0/5/0/10.100
!
interface G0/2/0/20.200
!
pbb core
!
!
!
Configuring Backbone VLAN Tag: Example
This example shows how to configure the backbone VLAN tag:
config
l2vpn
bridge group PBB
bridge-domain PBB-CORE
interface G0/5/0/10.100
!
interface G0/2/0/20.200
!
pbb core
rewrite ingress tag push dot1ad 100 symmetric
!
!
!
Configuring Backbone Source MAC Address: Example
This example shows how to configure the backbone source MAC address:
config
l2vpn
pbb
backbone-source-mac 0045.1200.04
!
!
Configuring Static Mapping and Unknown Unicast MAC Address under the
PBB Edge Bridge Domain
This example shows how to configure static mapping and unknown unicast MAC address under the PBB edge
bridge domain:
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
399
Implementing IEEE 802.1ah Provider Backbone Bridge
Configuring PBB Core Bridge Domain: Example

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model