Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# interface GigabitEthernet0/1/0/6

Enters configuration mode for the named interface.

Step 6 split-horizon group

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac)# split-horizon group

Enters configuration mode for the named interface.

Step 7 commit

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac)# commit

Saves configuration changes

Step 8 end

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac)# end

Returns to EXEC mode.

Step 9 show l2vpn bridge-domain detail

Example:

RP/0/RSP0/CPU0:router show l2vpn bridge-domain detail

Displays information about bridges, including whether each AC is in the AC split horizon group or not.

Adding an Access Pseudowire to the AC Split Horizon Group

These steps show how to add an access pseudowire as a member to the split horizon group for attachment

circuits (ACs) under a bridge domain.

SUMMARY STEPS

1. configure

2. l2vpn

3. bridge group bridge-group-name

4. bridge-domain bridge-domain-name

5. neighbor A.B.C.D pw-id pseudowire-id

6. split-horizon group

7. commit

8. end

9. show l2vpn bridge-domain detail

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

265

Implementing Multipoint Layer 2 Services

Adding an Access Pseudowire to the AC Split Horizon Group

Cisco ASR 9000 Series Configuration Guidelines

Other manuals for Cisco ASR 9000 Series