EasyManua.ls Logo

Cisco ASR 9000 Series

Cisco ASR 9000 Series
694 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IP Source Guard: enabled, Logging: enabled
IP source guard drop counters:
packets: 1000, bytes: 64000
This example shows the output of the show l2vpn forwarding interface interface-name detail location
location-name command:
# show l2vpn forwarding interface g0/0/0/1.10 detail location 0/0/CPU0
Local interface: GigabitEthernet0/0/0/1.10, Xconnect id: 0x40001, Status: up
IP Source Guard: enabled, Logging: enabled
This example shows the logging display:
LC/0/0/CPU0:Jun 16 13:32:25.334 : l2fib[188]: %L2-L2FIB-5-SECURITY_IPSG_VIOLATION_AC : IP
source guard in AC GigabitEthernet0_0_0_7.1001 detected violated packet - source MAC:
0000.0000.0200, destination MAC: 0000.0003.0000, source IP: 130.0.0.1, destination IP:
125.34.2.5
LC/0/5/CPU0:Jun 16 13:33:25.530 : l2fib[188]: %L2-L2FIB-5-SECURITY_IPSG_VIOLATION_AC : IP
source guard in AC Bundle-Ether100.100 detected violated packet - source MAC: 0000.0000.0064,
destination MAC: 0000.0040.0000, source IP: 14.5.1.3, destination IP: 45.1.1.10
Configuring G.8032 Ethernet Ring Protection: Example
This sample configuration illustrates the elements that a complete G.8032 configuration includes:
# Configure the ERP profile characteristics if ERP instance behaviors are non-default.
ethernet ring g8032 profile ERP-profile
timer wtr 60
timer guard 100
timer hold-off 1
non-revertive
# Configure CFM MEPs and configure to monitor the ring links.
ethernet cfm
domain domain1
service link1 down-meps
continuity-check interval 100ms
efd
mep crosscheck
mep-id 2
domain domain2
service link2 down-meps
continuity-check interval 100ms
efd protection-switching
mep crosscheck
mep id 2
Interface Gig 0/0/0/0
ethernet cfm mep domain domain1 service link1 mep-id 1
Interface Gig 1/1/0/0
ethernet cfm mep domain domain2 service link2 mep-id 1
# Configure the ERP instance under L2VPN
l2vpn
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
343
Implementing Multipoint Layer 2 Services
Configuring G.8032 Ethernet Ring Protection: Example

Table of Contents

Other manuals for Cisco ASR 9000 Series

Related product manuals