Cisco ASR 9000 Series

remote-as 100
description core-facing
update-source Loopback1
address-family l2vpn evpn
import re-originate stitching-rt
advertise l2vpn evpn re-originated
!
neighbor 209.165.202.130
remote-as 200
ebgp-multihop 255
update-source Loopback1
address-family l2vpn evpn
import stitching-rt re-originate
route-policy passall in
encapsulation-type vxlan
route-policy passall out
advertise l2vpn evpn re-originated stitching-rt
!
Example:All-Active MultiHomingwithUniqueVTEP IPAddress
Configuration
The following example shows the all-active multi homing with unique VTEP IP address configuration:
interface nve1
source-interface loopback1
member vni 5100
mcast-address 239.1.1.1
host-reachabilty protocol bgp
!
evpn
evi 10
bgp
route-target import 100:10
route-target import 200:5100 stitching
route-target export 200:5100 stitching
!
l2vpn
bridge group DCI
bridge-domain V1
evpn evi 10
member vni 5100
!
router bgp 100
bgp router-id 209.165.200.226
address-family l2vpn evpn
!
neighbor 209.165.201.2
remote-as 100
description core-facing
update-source Loopback1
address-family l2vpn evpn
import re-originate stitching-rt
multipath
advertise l2vpn evpn re-originated
!
neighbor 209.165.202.130
remote-as 200
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
519
EVPN Features
Example: All-Active Multi Homing with Unique VTEP IP Address Configuration