Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

RP/0/RSP0/CPU0:router (config-l2vpn)# xconnect group g1

Configures the cross-connect group.

Step 4 p2p xconnect-name

Example:

RP/0/RSP0/CPU0:router (config-l2vpn-xc)# p2p xc3

Configures the point-to-point cross-connect.

Step 5 interface type interface-path-id

Example:

RP/0/RSP0/CPU0:router (config-l2vpn-xc-p2p)# interface GigabitEthernet0/0/0/4.2

Specifies the interface type ID.

Step 6 neighbor ipv6 peer-address pw-id pseudowire-id

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p)# neighbor ipv6 1111:2222::cdef pw-id 1

Specifies the peer with which to cross connect, and configures the pseudowire segment for the cross-connect.

Step 7 l2tp static local cookie size bytes

Example:

RP/0/RSP0/CPU0:router (config-l2vpn-xc-p2p-pw)# l2tp static local cookie size 0

Configures the static local cookie size settings for the L2TP pseudowire.

In the case of a non-zero cookie size, the value of the cookie is a mandatory argument.

Note

Step 8 l2tp static local cookie size bytes

Example:

RP/0/RSP0/CPU0:router (config-l2vpn-xc-p2p-pw)# l2tp static remote cookie size 0

Configures the static remote cookie size settings for the L2TP pseudowire.

In the case of a non-zero cookie size, the value of the cookie is a mandatory argument.

Note

Step 9 Use the commit or end command.

commit - Saves the configuration changes and remains within the configuration session.

end - Prompts user to take one of these actions:

• Yes - Saves configuration changes and exits the configuration session.

• No - Exits the configuration session without committing the configuration changes.

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

159

Implementing Point to Point Layer 2 Services

Configuring Local And Remote Cookies

Cisco ASR 9000 Series Configuration Guidelines

Other manuals for Cisco ASR 9000 Series