Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Example:

RP/0/RSP0/CPU0:router(config)# l2vpn

RP/0/RSP0/CPU0:router(config-l2vpn)#

Enters the L2VPN configuration mode.

Step 3 bridge group bridge group name

Example:

RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group csco

RP/0/RSP0/CPU0:router(config-l2vpn-bg)#

Creates a bridge group so that it can contain bridge domains and then assigns network interfaces to the bridge domain.

Step 4 bridge-domain bridge-domain name

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain abc

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)#

Establishes a bridge domain and enters L2VPN bridge group bridge domain configuration mode.

Step 5 vfi { vfi-name }

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# vfi v1

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-vfi)#

Configures virtual forwarding interface (VFI) parameters and enters L2VPN bridge group bridge domain VFI configuration

mode.

Step 6 neighbor { A.B.C.D } { pw-id value }

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-vfi)# neighbor 10.1.1.2 pw-id 1000

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-vfi-pw)#

Adds a pseudowire port to a bridge domain or a pseudowire to a bridge virtual forwarding interface (VFI).

• Use the A.B.C.D argument to specify the IP address of the cross-connect peer.

• Use the pw-id keyword to configure the pseudowire ID and ID value. The range is 1 to 4294967295.

Step 7 pw-class { class-name }

Example:

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-vfi-pw)# pw-class canada

Configures the pseudowire class template name to use for the pseudowire.

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

248

Implementing Multipoint Layer 2 Services

Attaching Pseudowire Classes to Pseudowires

Cisco ASR 9000 Series Configuration Guidelines

Other manuals for Cisco ASR 9000 Series