Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

12. port-id id

13. hello-time seconds

14. max age seconds

15. Use the commit or end command.

DETAILED STEPS

Step 1 configure

Example:

RP/0/RSP0/CPU0:router# configure

Enters the Global Configuration mode.

Step 2 spanning-tree mstag pvstag protocol instance identifier

Example:

RP/0/RSP0/CPU0:router(config)# spanning-tree pvstag a

RP/0/RSP0/CPU0:router(config-pvstag)#

Enters the PVSTAG configuration submode.

Step 3 preempt delay for interval { seconds | minutes | hours }

Example:

RP/0/RSP0/CPU0:router(config-pvstag)# preempt delay for 10 seconds

Specifies the delay period during which startup BPDUs should be sent, before preempting.

Step 4 interface type interface-path-id or interface Bundle-Ether bundle-id

Example:

RP/0/RSP0/CPU0:router(config-pvstag)# interface GigabitEthernet0/2/0/30.1

RP/0/RSP0/CPU0:router(config-pvstag-if)#

RP/0/RSP0/CPU0:router(config-pvstag)# interface Bundle-Ether 100

RP/0/RSP0/CPU0:router(config-pvstag-if)#

Enters the PVSTAG interface configuration submode, and enables PVSTAG for the specified port.

Step 5 vlan vlan-id

Example:

RP/0/RSP0/CPU0:router(config-pvstag-if)# vlan 200

Enables and configures a VLAN on this interface.

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

444

Implementing Multiple Spanning Tree Protocol

Configuring PVSTAG parameters

Cisco ASR 9000 Series Configuration Guidelines

Other manuals for Cisco ASR 9000 Series