Cisco ASR 9000 Series Configuration Guidelines

Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters the l2vpn configuration mode.
Step 3 bridge group bridge-group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group 1
Enters the bridge group configuration mode.
Step 4 bridge-domain bridge-domain-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain 1-1
Enters the bridge domain configuration mode.
Step 5 interface GigabitEthernet GigabitEthernet Interface Instance
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# interface GigabitEthernet 0/0/0/1.1
Enters interface configuration mode.
Step 6 evi ethernet vpn id
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac)# evi 1
Creates the ethernet VPN ID.
Step 7 exit
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac-evi)# exit
Exits the current configuration mode.
Step 8 exit
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# exit
Exits the current configuration mode.
Step 9 bridge-domain bridge-domain-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain 1-2
Enters the bridge domain configuration mode.
Step 10 interface GigabitEthernet GigabitEthernet Interface Instance
Example:
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
489
EVPN Features
Configure EVPN L2 Bridging Service

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model