Cisco ASR 9000 Series

set med 200
else
set med 1000
endif
end-policy
!
router bgp 100
address-family ipv4 unicast
!
neighbor 10.0.0.10
remote-as 8
address-family ipv4 unicast
route-policy policy_use_pass_mac_set in
!
!
!
end
/* Configuring a esi-set and refering it in a route-policy (Attach point - neighbor-in) */
Wed Oct 26 11:52:23.720 IST
esi-set demo_esi
ad34.1233.1222.ffff.44ff,
ad34.1233.1222.ffff.6666
end-set
!
route-policy use_esi
if esi in demo_esi then
set local-preference 100
else
set local-preference 300
endif
end-policy
EVPN Route Policy Examples
route-policy ex_2
if rd in (2.2.18.2:1004) and evpn-route-type is 1 then
drop
elseif rd in (2.2.18.2:1009) and evpn-route-type is 1 then
drop
else
pass
endif
end-policy
!
route-policy ex_3
if evpn-route-type is 5 then
set extcommunity bandwidth (100:9999)
else
pass
endif
end-policy
!
route-policy samp
end-policy
!
route-policy samp1
if rd in (30.0.101.2:0) then
pass
endif
end-policy
!
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
578
EVPN Features
Running Configuration